Introduction to Sulfur dioxide pressurized Roots blower and Roots Blower structure principle

Sulfur dioxide pressurized Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，the main structure includes rotator, impeller, case, bearing, muffler and so on，Sulfur dioxide pressurized Roots blowerThe overall structural design is relatively simple。

1、Brief introduction of Sulfur dioxide pressurized Roots blower

Sulfur dioxide pressurized Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，multifunctional, with functions such as material fluidization, pressurized transportation, dehydrate, material handling and aeration，in the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，it is widely used in pottery and porcelain, manufacturing industry, port, petrochemical industry, power and other industries，the product looks atmospheric.。

Sulfur dioxide pressurized Roots blower

2、Sulfur dioxide pressurized Roots blower application

Sulfur dioxide pressurized Roots blowerWidely used incool,Material fluidization,supply air,mix,exhaust emission and so on，it has the functions of aeration, dehydrate, cool, ventilation and supply air，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Sulfur dioxide pressurized Roots blower perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Sulfur dioxide pressurized Roots blower less vibration and noise.、Because of the design of three-blade rotor, the Sulfur dioxide pressurized Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Small size and small floor space make it easy to arrange and install in places with limited space.，it is widely used inDust removal,chemical fertilizer,Textile light textile,Flue gas treatment,mine and other industries，the product looks beautiful.。

Sulfur dioxide pressurized Roots blower

3、Video analysis of Sulfur dioxide pressurized Roots blower

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Sulfur dioxide pressurized Roots blowert operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Sulfur dioxide pressurized Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a positive displacement blower with forced gas transmission characteristics.。

4、Functional advantages of Sulfur dioxide pressurized Roots blower

Sulfur dioxide pressurized Roots blowers have the following advantages.

1. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

2. Convenient maintenance

The structure of the Sulfur dioxide pressurized Roots blower is relatively simple and easy to maintain.

3. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

4. Long service life

The mechanical friction of the Sulfur dioxide pressurized Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

5. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

Sulfur dioxide pressurized Roots blower

5、Structural characteristics of Sulfur dioxide pressurized Roots blower

The Sulfur dioxide pressurized Roots blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Sulfur dioxide pressurized Roots blower enters and exits.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. impeller

It is the rotating part of the Sulfur dioxide pressurized Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Sulfur dioxide pressurized Roots blower has gradually replaced the two-leaf Sulfur dioxide pressurized Roots blower.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Sulfur dioxide pressurized Roots blower

6、Brief introduction of hyde powder

hyde is a professional manufacturer of Roots Blower, which produces Sulfur dioxide pressurized Roots blower with the advantage is Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the Sulfur dioxide pressurized Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Sulfur dioxide pressurized Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Sulfur dioxide pressurized Roots blower perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

hyde powder

Sulfur dioxide pressurized Roots blowerusually used in building materials, Textile light textile, make paper, sewage disposal, smelt and other fields，it has the functions of desulfurization oxidation, exhaust emission, material fluidization, aquaculture and dry。