Introduction to Unmanned feeding and conveying, introduction to Powder pneumatic conveying function advantages and characteristics

Unmanned feeding and conveyingit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，the advantage is Closed pipeline transportation，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、Can be fed from one place to many places for decentralized transportation.、The whole conveying process is sealed.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，the product looks beautiful.，it has the functions of material handling, Explosion-proof involves, Physical processing assistance, Closed conveying and Automatic control，widely used inpharmaceutical factory,cast,environmental protection,plastic,chemical plant and other industries。

1、Brief introduction of Unmanned feeding and conveying

Unmanned feeding and conveyingthat is, the technology of conveying granular materials in closed pipes by air flow.，Reliable equipment,The failure rate is low,Can carry out long-distance dispersion transportation.,Easy maintenance,be of simple construction。

Unmanned feeding and conveying

2、Unmanned feeding and conveying HD picture

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Unmanned feeding and conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Introduction of advantages of Unmanned feeding and conveying

The advantages of Unmanned feeding and conveying are as follows:

1. High conveying efficiency and low cost.

The Unmanned feeding and conveying system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Unmanned feeding and conveyings can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

2. Low maintenance cost

The Unmanned feeding and conveying system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

3. High conveying quality

In the process of conveying, the Unmanned feeding and conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

4. Flexible pipeline configuration

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

5. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Unmanned feeding and conveying occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

Unmanned feeding and conveying

4、Unmanned feeding and conveying function

Unmanned feeding and conveyingmultifunctional, with functions such as Environmental protection and pollution-free, material handling, Automatic control, Physical processing assistance and Closed conveying，the advantage is Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、Materials collected from several points can be sent to one place or one place to scattered points.、Materials are transported in a closed pipeline.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dry.、Large conveying capacity, long conveying distance and high conveying quality.。

Unmanned feeding and conveying

5、Unmanned feeding and conveying application

Unmanned feeding and conveyings have the following purposes.

1. Reduce pollution

The Unmanned feeding and conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. save energy and cut emissions

Although the Unmanned feeding and conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Unmanned feeding and conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Mixing and classification

In the process of conveying, the Unmanned feeding and conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. material handling

Unmanned feeding and conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Unmanned feeding and conveying

6、How much is the Unmanned feeding and conveying?

The Unmanned feeding and conveying price is introduced as follows:

1. Sales model

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Unmanned feeding and conveying is low.

2. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Unmanned feeding and conveying price and service can meet the actual needs of customers.

3. geographical position

hyde address:shandong(Province), the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. Product configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Unmanned feeding and conveying price is affected by the configuration, and the price varies.

Unmanned feeding and conveying

Unmanned feeding and conveyingis a common Unmanned feeding and conveying，it has the characteristics of Can reduce the labor intensity, Strong adaptability, Safe and reliable, Easy to realize automation and Reliable operation。