What is a Roots blower for building materials industry? Introduction to the advantages and characteristics of Roots Blower functions

Roots blower for building materials industryis an efficient volumetric gas conveying and pressurizing equipment.，widely used insmelt,petrochemical industry,pneumatic transport,make paper,coal chemical industry and other industries。

1、Brief introduction of Roots blower for building materials industry

Roots blower for building materials industrythe models are complete and can meet the needs of different users for different purposes.。

Roots blower for building materials industry

2、Roots blower for building materials industry video

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Roots blower for building materials industryt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Roots blower for building materials industry

As you can see from the live video.，hyde powder is a popular Roots blower for building materials industry。

3、Roots blower for building materials industry performance advantage

The advantages of Roots blower for building materials industry are as follows:

1. Run smoothly

The air volume of the Roots blower for building materials industry is proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower for building materials industry perform well in many situations where stable airflow is needed.

2. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

3. Convenient maintenance

The structure of the Roots blower for building materials industry is relatively simple and easy to maintain.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. Strong adaptability

Roots blower for building materials industrys are widely used in many fields, such as manufacturing industry, etc., especially suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

Roots blower for building materials industry

4、Structural advantages of Roots blower for building materials industry

The Roots blower for building materials industry has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. impeller

It is the rotating part of the Roots blower for building materials industry, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower for building materials industry has gradually replaced the two-leaf Roots blower for building materials industry.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Roots blower for building materials industry

5、Roots blower for building materials industry application

Roots blower for building materials industryIt has the functions of cool, aquaculture, supply air, aeration and Material fluidization，it has the functions of pressurized transportation, dehydrate, supply air, sewage disposal and ventilation，is a kind of high quality and low price Roots blower for building materials industry，in the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，is a positive displacement blower with forced gas transmission characteristics.。

Roots blower for building materials industry

6、Brief introduction of hyde

hyde powder is a professional manufacturer of Roots Blower, which produces Roots blower for building materials industry with Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the Roots blower for building materials industry has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Roots blower for building materials industry will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

hyde

Roots blower for building materials industrythe advantage is The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower for building materials industry perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Roots blower for building materials industry runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower for building materials industry less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，It has a wide range of uses, including material handling, exhaust emission, dehydrate, aeration and Pressurized transportation。