Introduction to Lu's fan for electroplating factory, blower advantages, characteristics and principles

Lu's fan for electroplating factorya rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，is a Lu's fan for electroplating factory，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Lu's fan for electroplating factory perform well in many situations where stable airflow is needed.、In the process of air intake and exhaust, the Lu's fan for electroplating factory will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Lu's fan for electroplating factory runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Lu's fan for electroplating factory perform well in many situations where stable airflow is needed.、Small size and small floor space make it easy to arrange and install in places with limited space.，usually used in Food and beverage processing, petrochemical industry, chemical fertilizer, smelt, mine and other fields，super quality and competitive price。The following is to introduce the Lu's fan for electroplating factory:

1、Brief introduction of Lu's fan for electroplating factory

Lu's fan for electroplating factoryis a positive displacement blower with forced gas transmission characteristics.，has been favored by more and more customers.。

Lu's fan for electroplating factory

2、Lu's fan for electroplating factory characteristics

Lu's fan for electroplating factoryit has the characteristics of wide application range, strong adaptability, low noise, wide application range and be of simple construction。

Lu's fan for electroplating factory

3、Lu's fan for electroplating factory working site

On-site aerial photography of Lu's fan for electroplating factory。

Lu's fan for electroplating factory

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the product looks atmospheric.。

4、Structural advantages of Lu's fan for electroplating factory

The Lu's fan for electroplating factory has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Lu's fan for electroplating factory enters and exits.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Lu's fan for electroplating factory, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. impeller

It is the rotating part of the Lu's fan for electroplating factory, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Lu's fan for electroplating factory has gradually replaced the two-leaf Lu's fan for electroplating factory.

Lu's fan for electroplating factory

5、Lu's fan for electroplating factory price

The Lu's fan for electroplating factory price is introduced as follows:

1. geographical position

The price of Lu's fan for electroplating factory in jinan is much lower than that in other regions, and hyde is a large enterprise specializing in the production and manufacture of Lu's fan for electroplating factory not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Lu's fan for electroplating factory price positioning more reasonable, low-cost and economical.

2. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

3. Configuration level

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. hyde powder has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

4. Brand strength

At present, there are various brands of Lu's fan for electroplating factory in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Lu's fan for electroplating factory are different.

5. product quality

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

Lu's fan for electroplating factory

6、hyde delivery site

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Lu's fan for electroplating factoryt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Lu's fan for electroplating factory

As you can see from the live video.hyde multifunctional, with functions such as sewage disposal, exhaust emission, aquaculture, material handling and mix。

Lu's fan for electroplating factoryit has the functions of mix, sewage disposal, pick up the suction, pressurized transportation and ventilation，durable performance,economical and durable,Precise control,convenient manufacture,convenient maintenance，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Lu's fan for electroplating factory less vibration and noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the Lu's fan for electroplating factory has little vibration and low noise during operation, and the operation is stable and reliable、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.。