Introduction to Roots blower for printing and dyeing factory, Roots Blower advantages, characteristics and principles

Roots blower for printing and dyeing factoryis a positive displacement blower with forced gas transmission characteristics.，is based on hyde powder is a kind of Roots blower for printing and dyeing factory manufactured by hyde powder。

1、Brief introduction of Roots blower for printing and dyeing factory

Roots blower for printing and dyeing factorya rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，It is mostly used in cool, pick up the suction, aeration, Desulfurization oxidation, dry, Pressurized transportation and so on。

Roots blower for printing and dyeing factory

2、Roots blower for printing and dyeing factory real shot picture

The finished products of the Roots blower for printing and dyeing factory factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Roots blower for printing and dyeing factory

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Structural characteristics of Roots blower for printing and dyeing factory

The Roots blower for printing and dyeing factory structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower for printing and dyeing factory, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Roots blower for printing and dyeing factory

4、Roots blower for printing and dyeing factory introduction video

On-site aerial photography of Roots blower for printing and dyeing factory。

Roots blower for printing and dyeing factory

As you can see from the live video.，hyde widely used inport,sewage disposal,water treatment,petrify,Dust removal and other industries。

5、Advantages of Roots blower for printing and dyeing factory principle

Roots blower for printing and dyeing factoryGas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，the main structure includes muffler, rotator, case, fuel tank, wallboard and so on，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower for printing and dyeing factory less vibration and noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower for printing and dyeing factory perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Roots blower for printing and dyeing factory runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。

Roots blower for printing and dyeing factory

6、Roots blower for printing and dyeing factory application

Roots blower for printing and dyeing factoryCommonly used inmix,aquaculture,Pressurized transportation,exhaust emission,Ventilation and so on，multifunctional, with functions such as pressurized transportation, cool, aeration, dehydrate and dry，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，the product looks atmospheric.，it is mainly composed of impeller, muffler, bearing, rotator and impeller，This productThe structure is novel, special, advanced, reasonable and scientific.。

Roots blower for printing and dyeing factory

Roots blower for printing and dyeing factoryThe overall structural design is relatively simple，the main structure includes fuel tank, rotator, case, bearing, impeller and so on，is a popular Roots blower for printing and dyeing factory。