Introduction to 304 Roots vacuum pump, blower specifications, model parameters

304 Roots vacuum pumpa rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Due to the adoption of synchronous gear transmission and small gap design, the 304 Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the 304 Roots vacuum pump less vibration and noise.、Because of the design of three-blade rotor, the 304 Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable，The price is more affordable，reliable quality。The following is to introduce the 304 Roots vacuum pump:

1、Brief introduction of 304 Roots vacuum pump

304 Roots vacuum pumpa rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，it has the functions of dry, mix, pressurized transportation, ventilation and desulfurization oxidation，the product looks beautiful.。

304 Roots vacuum pump

2、304 Roots vacuum pump principle

304 Roots vacuum pumpat the start of the operation,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，is a kind of 304 Roots vacuum pump manufactured by hyde。

304 Roots vacuum pump

3、304 Roots vacuum pump structure

The 304 Roots vacuum pump structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. muffler

Used to reduce the noise caused by airflow pulsation when the 304 Roots vacuum pump enters and exits.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the 304 Roots vacuum pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

304 Roots vacuum pump

4、304 Roots vacuum pump function

304 Roots vacuum pumpit has the functions of pressurized transportation, dehydrate, sewage disposal, cool and dry，is a popular 304 Roots vacuum pump，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，the advantage is It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the 304 Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the 304 Roots vacuum pump perform well in many situations where stable airflow is needed.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the 304 Roots vacuum pump perform well in many situations where stable airflow is needed.，it is mainly composed of fuel tank, impeller, bearing, case and muffler，This 304 Roots vacuum pumpThe structural design is simple, novel and special.。

304 Roots vacuum pump

5、304 Roots vacuum pump characteristics

304 Roots vacuum pumpthe main features are strong adaptability, convenient manufacture, wide application range, wide application range and strong adaptability，The price is relatively low.。

304 Roots vacuum pump

6、How much is the 304 Roots vacuum pump?

The 304 Roots vacuum pump price is introduced as follows:

1. region

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

2. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder 304 Roots vacuum pump manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the 304 Roots vacuum pump price can meet the purchasing needs of customers.

3. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of 304 Roots vacuum pump is low.

4. Brand strength

At present, there are various brands of 304 Roots vacuum pump in jinan. The performance, quality and after-sales of products under different brands are different, and the prices of 304 Roots vacuum pump are different.

5. product configuration

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

304 Roots vacuum pump

304 Roots vacuum pumpis a kind of high quality and low price 304 Roots vacuum pump，multifunctional, with functions such as aeration, ventilation, mix, material fluidization and aquaculture，it is mainly composed of rotator, wallboard, impeller, case and rotator。