Introduction to Carbon steel Roots vacuum pump system, advantages, characteristics and principles of Roots Blower

Carbon steel Roots vacuum pump systemthe models are complete and can meet the needs of different users for different purposes.，in the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，it has the functions of exhaust emission, supply air, material handling, dehydrate and cool，the advantage is Because of the design of three-blade rotor, the Carbon steel Roots vacuum pump system has little vibration and low noise during operation, and the operation is stable and reliable、Due to the adoption of synchronous gear transmission and small gap design, the Carbon steel Roots vacuum pump system runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Carbon steel Roots vacuum pump system less vibration and noise.、In the process of air intake and exhaust, the Carbon steel Roots vacuum pump system will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，the main features are be of simple construction, low noise, convenient manufacture, wide application range and wide application range。The following is to introduce the Carbon steel Roots vacuum pump system:

1、Brief introduction of Carbon steel Roots vacuum pump system

Carbon steel Roots vacuum pump systemis a positive displacement blower with forced gas transmission characteristics.，the product looks beautiful.，The structural design is simple, novel and special.，the main structure includes fuel tank, wallboard, bearing, impeller, muffler and so on，is developed and improved by hyde powder。

Carbon steel Roots vacuum pump system

2、Video analysis of Carbon steel Roots vacuum pump system

On-site aerial photography of Carbon steel Roots vacuum pump system。

Carbon steel Roots vacuum pump system

As you can see from the live video.，hyde powder it is widely used in Textile light textile, power, pneumatic transport, port, Environmental protection industry and other industries。

3、Carbon steel Roots vacuum pump system real beat

Various styles and styles of Carbon steel Roots vacuum pump system, complete models, for you to choose at will.。

Carbon steel Roots vacuum pump system

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Carbon steel Roots vacuum pump system function

Carbon steel Roots vacuum pump systemmultifunctional, with functions such as mix, sewage disposal, desulfurization oxidation, dry and material fluidization。

Carbon steel Roots vacuum pump system

5、Carbon steel Roots vacuum pump system structure

The Carbon steel Roots vacuum pump system structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. impeller

It is the rotating part of the Carbon steel Roots vacuum pump system, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Carbon steel Roots vacuum pump system has gradually replaced the two-leaf Carbon steel Roots vacuum pump system.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Carbon steel Roots vacuum pump system enters and exits.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Carbon steel Roots vacuum pump system

6、How much is the Carbon steel Roots vacuum pump system?

The Carbon steel Roots vacuum pump system price is introduced as follows:

1. manufacturing cost

When the Carbon steel Roots vacuum pump system is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

3. market

The degree of market competition is also an important factor affecting the price change of products. In order to improve the purchasing power of customers, manufacturers will take preferential measures and appropriately reduce prices.

4. Reasonable cost

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Carbon steel Roots vacuum pump system will also fluctuate to some extent.

5. Product configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. hyde pays special attention to the hardware configuration of products, so hyde powder Carbon steel Roots vacuum pump system has a higher cost performance.

Carbon steel Roots vacuum pump system

Carbon steel Roots vacuum pump systemat the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，the product looks beautiful.。