Introduction to High power Roots vacuum pump and blower structure principle

High power Roots vacuum pumpis a positive displacement blower with forced gas transmission characteristics.，it has the characteristics of wide application range, convenient manufacture, strong adaptability, Precise control and durable performance，it can be used in power, pneumatic transport, chemical fertilizer, water treatment, petrochemical industry and other industries。The following is to introduce the High power Roots vacuum pump:

1、Brief introduction of High power Roots vacuum pump

High power Roots vacuum pumpis an efficient volumetric gas conveying and pressurizing equipment.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the High power Roots vacuum pump less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the High power Roots vacuum pump perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the High power Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，can be customized according to user's needs.。

High power Roots vacuum pump

2、High power Roots vacuum pump application

High power Roots vacuum pumpIt has a wide range of uses, including supply air, pick up the suction, aeration, exhaust emission and Pressurized transportation，is a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it mainly includes bearing, muffler, rotator, case and muffler。

High power Roots vacuum pump

3、Advantages of High power Roots vacuum pump principle

High power Roots vacuum pumpGas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，it has the functions of supply air, material fluidization, pick up the suction, ventilation and aeration，be loved by our customers.。

High power Roots vacuum pump

4、High power Roots vacuum pump structure

The High power Roots vacuum pump structure is introduced as follows:

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. impeller

It is the rotating part of the High power Roots vacuum pump, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf High power Roots vacuum pump has gradually replaced the two-leaf High power Roots vacuum pump.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High power Roots vacuum pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. muffler

Used to reduce the noise caused by airflow pulsation when the High power Roots vacuum pump enters and exits.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

High power Roots vacuum pump

5、High power Roots vacuum pump quotation

The High power Roots vacuum pump price is introduced as follows:

1. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

2. market quotation

When the market demand for High power Roots vacuum pump is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

3. company strength

There are many manufacturers of products in shandong(Province), and the strength, technology and after-sales of each manufacturer are different, so the quotation for High power Roots vacuum pump is naturally different.

4. Low cost of raw materials

hyde powder has a large production scale, strong manufacturing strength and high degree of automation in product production. In such a manufacturing environment, the cost of manufacturing High power Roots vacuum pump in hyde powder is greatly reduced.

5. type of operation

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

High power Roots vacuum pump

6、hyde introduced

Shandong Haide Fenti Engineering Co., Ltd., located in jinan, Shandong province, is a large High power Roots vacuum pump manufacturer. The High power Roots vacuum pump produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

hyde powder

High power Roots vacuum pumpWidely used indry,cool,material handling,Ventilation,dehydrate and so on，the product looks atmospheric.，is a positive displacement blower.。