Introduction to Roots vacuum pump system for food packaging and blower structure principle

Roots vacuum pump system for food packagingthe models are complete and can meet the needs of different users for different purposes.，the advantage is Because of the design of three-blade rotor, the Roots vacuum pump system for food packaging has little vibration and low noise during operation, and the operation is stable and reliable、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots vacuum pump system for food packaging perform well in many situations where stable airflow is needed.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots vacuum pump system for food packaging less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。

1、Brief introduction of Roots vacuum pump system for food packaging

Roots vacuum pump system for food packagingis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，in the course of work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，the product looks atmospheric.，Structure consists of fuel tank, wallboard, case, rotator, fuel tank and so on，is based on hyde is a Roots vacuum pump system for food packaging newly developed by hyde。

Roots vacuum pump system for food packaging

2、Introduction of Roots vacuum pump system for food packaging characteristics

Roots vacuum pump system for food packagingthe main features are Precise control, run smoothly, economical and durable, stable and reliable and low noise，the models are complete and can meet the needs of different users for different purposes.，at work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is a kind of high quality and low price Roots vacuum pump system for food packaging，has been favored by more and more customers.。

Roots vacuum pump system for food packaging

3、Functional advantages of Roots vacuum pump system for food packaging

Roots vacuum pump system for food packagings have the following advantages.

1. Convenient maintenance

The structure of the Roots vacuum pump system for food packaging is relatively simple and easy to maintain.

2. Long service life

The mechanical friction of the Roots vacuum pump system for food packaging is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

3. Compact structure and small floor space.

The Roots vacuum pump system for food packaging is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

4. Durable performance

The impeller and shaft of the Roots vacuum pump system for food packaging are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

5. Strong adaptability

Roots vacuum pump system for food packagings are suitable for many purposes and have been widely used in various fields.

Roots vacuum pump system for food packaging

4、Roots vacuum pump system for food packaging structure

The Roots vacuum pump system for food packaging has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots vacuum pump system for food packaging, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. impeller

It is the rotating part of the Roots vacuum pump system for food packaging, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots vacuum pump system for food packaging has gradually replaced the two-leaf Roots vacuum pump system for food packaging.

Roots vacuum pump system for food packaging

5、Roots vacuum pump system for food packaging characteristics

Roots vacuum pump system for food packagingit has the characteristics of convenient maintenance, be of simple construction, convenient manufacture, wide application range and energy-efficient，Widely used inaeration,Ventilation,cool,supply air,sewage disposal and so on。

Roots vacuum pump system for food packaging

6、Roots vacuum pump system for food packaging video detail

The following is the live video of Roots vacuum pump system for food packaging designed and produced by hyde powder for users, from which we can see the the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、In the process of air intake and exhaust, the Roots vacuum pump system for food packaging will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation. of hyde powderRoots vacuum pump system for food packaging.。

Roots vacuum pump system for food packaging

As you can see from the live video.，hyde it is widely used in aquaculture, Environmental protection industry, Textile light textile, Food and beverage processing and manufacturing industry。

Roots vacuum pump system for food packagingat runtime,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，Mainly used formix,pick up the suction,Desulfurization oxidation,material handling andMaterial fluidization，Simple structure and reliable operation.，it mainly includes muffler, wallboard, impeller, bearing and muffler。