Introduction to Powder conveying three-leaf roots vacuum pump and the roots vacuum pump structure principle

Powder conveying three-leaf roots vacuum pumpis a kind of vacuum equipment that uses a pair of rotors (usually two impellers with special profile) that rotate synchronously and reversely in the pump cavity to extract gas.，be of simple construction,Fan vibration is small.,Convenient manufacture,Run smoothly,No lubrication required，it is usually composed of pump body, bearing, rotator, gearing and sealing device，was developed and designed by hyde powder。The following is to introduce the Powder conveying three-leaf roots vacuum pump:

1、Brief introduction of Powder conveying three-leaf roots vacuum pump

Powder conveying three-leaf roots vacuum pumpbelonging to a rotary vacuum pump.，it has the functions of aeration, Ventilation, mix, exhaust emission and supply air。

Powder conveying three-leaf roots vacuum pump

2、Powder conveying three-leaf roots vacuum pump principle

Powder conveying three-leaf roots vacuum pumpmainly based on the relative rotational movement of the rotor in the pump chamber. There are two rotors in the pump, and a certain gap is kept between them and the inner wall of the pump shell. Through the rotation of the rotor, the gas is sucked in from the air inlet, and then discharged from the air outlet through the processes of compression and exhaust. Due to the special design of the rotor profile, the gas in the pump cavity is effectively compressed and discharged, thus achieving vacuum extraction.，is a vacuum pump that sucks air through a pair of rotors making relative rotary motion in the pump cavity.，multifunctional, with functions such as material handling, dehydrate, aquaculture, pick up the suction and Material fluidization，Small size and small floor space make it easy to arrange and install in places with limited space.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Because of the design of three-blade rotor, the Powder conveying three-leaf roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Powder conveying three-leaf roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，usually used in power, chemical fertilizer, Textile light textile, sewage disposal, coal chemical industry and other fields。

Powder conveying three-leaf roots vacuum pump

3、Structural advantages of Powder conveying three-leaf roots vacuum pump

The Powder conveying three-leaf roots vacuum pump structure is introduced as follows:

1. sealing device

The sealing device is used to ensure that the gas in the pump cavity will not leak to the external environment.

2. rotator

Rotor is the core component of the Powder conveying three-leaf roots vacuum pump, and its profile design and machining accuracy directly affect the performance and service life of the pump.

3. gearing

The transmission device is usually driven by motor or reducer, which makes the rotor rotate relatively in the pump cavity.

4. bearing

Bearings are responsible for supporting the rotary motion of the rotor, and high-precision bearings are usually used to ensure the stable operation of the rotor.

5. pump body

Pump body is usually made of cast iron or cast steel, which has good strength and sealing performance.

Powder conveying three-leaf roots vacuum pump

4、Powder conveying three-leaf roots vacuum pump working site

The following is the live video of Powder conveying three-leaf roots vacuum pump designed and produced by hyde powder for users, from which we can see the the advantage is Due to the adoption of synchronous gear transmission and small gap design, the Powder conveying three-leaf roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Powder conveying three-leaf roots vacuum pump perform well in many situations where stable airflow is needed.、Because of the design of three-blade rotor, the Powder conveying three-leaf roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption. of Powder conveying three-leaf roots vacuum pump.。

Powder conveying three-leaf roots vacuum pump

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a kind of vacuum equipment that uses a pair of rotors (usually two impellers with special profile) that rotate synchronously and reversely in the pump cavity to extract gas.。

5、Powder conveying three-leaf roots vacuum pump function

Powder conveying three-leaf roots vacuum pumpit has the functions of cool, aeration, exhaust emission, Material fluidization and material handling，the advantage is Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the Powder conveying three-leaf roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Powder conveying three-leaf roots vacuum pump less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Powder conveying three-leaf roots vacuum pump perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Powder conveying three-leaf roots vacuum pump less vibration and noise.。

Powder conveying three-leaf roots vacuum pump

6、Company preferential activities

Powder conveying three-leaf roots vacuum pump is a new type of the roots vacuum pump introduced by Shandong Haide Fenti Engineering Co., Ltd. manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for make paper and other industries. Now consult hyde powderproduction-manufacturing的Powder conveying three-leaf roots vacuum pump, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde

Powder conveying three-leaf roots vacuum pumpthe product looks atmospheric.，the main features are Long service life, Large volume utilization rate, Economical and durable, Volumetric efficiency and High efficiency，it has been widely used in manufacturing industry, pneumatic transport, power, pottery and porcelain, Pharmaceutical and chemical industries and other industries。