Introduction to Carbon particle pneumatic conveying, introduction to Powder conveying function advantages and characteristics

Carbon particle pneumatic conveyingis a reliable material conveying equipment for conveying powdery materials under high pressure.，multifunctional, with functions such as Environmental protection and pollution-free, Physical processing assistance, Environmental protection and pollution-free, material handling and Automatic control。

1、Brief introduction of Carbon particle pneumatic conveying

Carbon particle pneumatic conveyingis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.。

Carbon particle pneumatic conveying

2、Carbon particle pneumatic conveying video

Speak directly with facts on the spot。

Carbon particle pneumatic conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. features include Convenient for material transportation and recovery., High system reliability, Quantitative transportation, Simple system and Easy maintenance。

3、Carbon particle pneumatic conveying performance advantage

The advantages of Carbon particle pneumatic conveying are as follows:

1. Flexible configuration of conveying pipeline and optimization of process flow.

The Carbon particle pneumatic conveying is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

2. Small floor space

Compared with other transportation modes, the Carbon particle pneumatic conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

3. energy saving and environmental protection

Compared with the traditional mechanical transportation mode, the Carbon particle pneumatic conveying has higher transportation efficiency, which can reduce transportation time and transportation cost. Moreover, the Carbon particle pneumatic conveying does not need additional power to drive, which reduces energy consumption.

4. High degree of automation

Modern Carbon particle pneumatic conveying systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

5. Flexible layout

The pipeline layout of the Carbon particle pneumatic conveying is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Carbon particle pneumatic conveying system to adapt to various complex production environments and meet different production needs.

Carbon particle pneumatic conveying

4、Structural advantages of Carbon particle pneumatic conveying

The Carbon particle pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Carbon particle pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. control system

The control system is the "brain" of the Carbon particle pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Carbon particle pneumatic conveying

5、How much is the Carbon particle pneumatic conveying?

The Carbon particle pneumatic conveying price is introduced as follows:

1. Product configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. cost of production

The cost of manufacturing Carbon particle pneumatic conveying varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

4. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. quality factor

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

Carbon particle pneumatic conveying

6、Company selection skills

Choosing a suitable Carbon particle pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Carbon particle pneumatic conveying products that meet the demand and have good cost performance.。

hyde powder

Carbon particle pneumatic conveyingis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，the advantage is It can feed from one place to many places for decentralized transportation and realize long-distance operation.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Materials are transported by closed pipelines.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、It is easy to realize the transportation engineering goal of multi-point feeding and multi-point unloading.。