Introduction to Sawdust particle pneumatic conveying, introduction to pneumatic conveying advantages and characteristics

Sawdust particle pneumatic conveyingis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，multifunctional, with functions such as material handling, Physical processing assistance, Automatic control, material handling and Physical processing assistance。The following is to introduce the Sawdust particle pneumatic conveying:

1、Brief introduction of Sawdust particle pneumatic conveying

Sawdust particle pneumatic conveyingis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，is based on hyde powder is a Sawdust particle pneumatic conveying newly developed by hyde powder。

Sawdust particle pneumatic conveying

2、Sawdust particle pneumatic conveying structure

The Sawdust particle pneumatic conveying structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sawdust particle pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Air source device

The air source device is the power core of the Sawdust particle pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Sawdust particle pneumatic conveying

3、Sawdust particle pneumatic conveying video detail

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Sawdust particle pneumatic conveying production process and production site, and gain favorable comments and recognition from customers.。

Sawdust particle pneumatic conveying

As you can see from the live video.，hyde widely used inmedicine,metallurgy,logistics,building materials,environmental protection and other industries。

4、Sawdust particle pneumatic conveying application

Sawdust particle pneumatic conveyings have the following purposes.

1. Mixing and classification

In the process of conveying, the Sawdust particle pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. save energy and cut emissions

Although the Sawdust particle pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Reduce pollution

The Sawdust particle pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Long-distance and multipoint transportation

The Sawdust particle pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Sawdust particle pneumatic conveyings have important application value in large factories and cross-regional material transportation.

5. Bulk material transportation

The Sawdust particle pneumatic conveying is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Sawdust particle pneumatic conveying, these materials can be efficiently transferred between different production links or equipment.

Sawdust particle pneumatic conveying

5、Introduction of Sawdust particle pneumatic conveying characteristics

Sawdust particle pneumatic conveyingit has the characteristics of Convenient operation and management, Save manpower, Large conveying capacity, Easy to automate management and Safe and reliable，Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.。

Sawdust particle pneumatic conveying

6、Functional advantages of Sawdust particle pneumatic conveying

Sawdust particle pneumatic conveyings have the following advantages.

1. Material quality protection

In the process of conveying, the Sawdust particle pneumatic conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

2. Flexible pipeline configuration

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

3. Small floor space

Compared with other transportation modes, the Sawdust particle pneumatic conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

4. Multiple process operations can be carried out at the same time

While conveying materials, the Sawdust particle pneumatic conveying system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

5. Efficient continuous transportation

The Sawdust particle pneumatic conveying can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

Sawdust particle pneumatic conveying

Sawdust particle pneumatic conveyingfeatures include Avoid material pollution, Quantitative transportation, omniseal, Reliable equipment and Wide range of conveying materials，is a popular Sawdust particle pneumatic conveying，Mainly used forLong distance transportation,Multi-point transportation,Bulk material transportation,Long-distance and multipoint transportation andcut down on energy consumption。