Introduction to Pneumatic conveying of negative electrode material particles and Powder conveying advantages and features

Pneumatic conveying of negative electrode material particlesis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，Commonly used inmaterial handling,Reduce pollution,Bulk material transportation,cut down on energy consumption,Dust removal and essence and so on。The following is to introduce the Pneumatic conveying of negative electrode material particles:

1、Brief introduction of Pneumatic conveying of negative electrode material particles

Pneumatic conveying of negative electrode material particlesis a material conveying system that uses the pressure of gas to convey powder materials.，it has the characteristics of easy installation, be of simple construction, Can make full use of space, versatility and Convenient for material transportation and recovery.，is a Pneumatic conveying of negative electrode material particles。

Pneumatic conveying of negative electrode material particles

2、Pneumatic conveying of negative electrode material particles characteristics

Pneumatic conveying of negative electrode material particlesautomation,Good dustproof effect,Centralized transportation,Can reduce the labor intensity,Less maintenance.，it has been widely used in medicine, environmental protection, transportation, metallurgy, building material and other industries，It has the functions of Long-distance and multipoint transportation, Environmental protection and cleaner production, Heating, cooling and drying, Multi-point transportation and Mixing and classification，at runtime,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，multifunctional, with functions such as Environmental protection and pollution-free, Physical processing assistance, Physical processing assistance, material handling and Environmental protection and pollution-free。

Pneumatic conveying of negative electrode material particles

3、Pneumatic conveying of negative electrode material particles principle

Pneumatic conveying of negative electrode material particlesat work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，is a conveying system that uses airflow to convey powder and granular materials.，the advantage is The pipeline layout is flexible, and it can be arranged according to the specific terrain.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、The materials are completely sealed during transportation.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.，customizable。

Pneumatic conveying of negative electrode material particles

4、Introduction of advantages of Pneumatic conveying of negative electrode material particles

Pneumatic conveying of negative electrode material particless have the following advantages.

1. High degree of automation

Modern Pneumatic conveying of negative electrode material particles systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

2. Easy to maintain

The Pneumatic conveying of negative electrode material particles system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

3. Multi-point to multi-point transportation

The Pneumatic conveying of negative electrode material particles system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. be of simple construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

5. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Pneumatic conveying of negative electrode material particles occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

Pneumatic conveying of negative electrode material particles

5、Pneumatic conveying of negative electrode material particles structure composition

The Pneumatic conveying of negative electrode material particles structure is introduced as follows:

1. Air source device

The air source device is the power core of the Pneumatic conveying of negative electrode material particles system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of negative electrode material particles system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying of negative electrode material particles

Pneumatic conveying of negative electrode material particlesit is widely used in cast, heat-engine plant, pharmaceutical factory, grain processing, power and other industries，it has the structure of control system, delivery system, dust pelletizing system, Bunker system and Conveying pipeline system，It uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.。