Introduction to Gypsum ash pneumatic conveying and pneumatic conveying system structure principle

Gypsum ash pneumatic conveyingis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，It has a wide range of uses, including Dust removal and essence, Heating, cooling and drying, Multi-point transportation, Bulk material transportation and Long-distance and multipoint transportation，it can be used in grain processing, medicine, logistics, transportation, machine building and other industries。

1、Brief introduction of Gypsum ash pneumatic conveying

Gypsum ash pneumatic conveyingis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，it has the characteristics of Convenient for material transportation and recovery., energy saving and environmental protection, Centralized transportation, Avoid material pollution and Large conveying capacity。

Gypsum ash pneumatic conveying

2、Gypsum ash pneumatic conveying performance advantage

The advantages of Gypsum ash pneumatic conveying are as follows:

1. Strong adaptability

The Gypsum ash pneumatic conveying system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

2. High conveying efficiency

The Gypsum ash pneumatic conveying can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

3. Environmental protection and pollution-free

Because the Gypsum ash pneumatic conveying is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

4. High degree of automation

The Gypsum ash pneumatic conveying system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

5. Convenient maintenance and easy automation.

The Gypsum ash pneumatic conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

Gypsum ash pneumatic conveying

3、Gypsum ash pneumatic conveying video

Speak directly with facts on the spot。

Gypsum ash pneumatic conveying

As you can see from the live video.，hyde powder the main structure includes delivery system, dust pelletizing system, control system, Conveying pipeline system, Bunker system and so on。

4、Structural characteristics of Gypsum ash pneumatic conveying

The Gypsum ash pneumatic conveying structure is introduced as follows:

1. control system

The control system is the "brain" of the Gypsum ash pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Gypsum ash pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Gypsum ash pneumatic conveying

5、Gypsum ash pneumatic conveying function

Gypsum ash pneumatic conveyingmultifunctional, with functions such as Environmental protection and pollution-free, material handling, Automatic control, Explosion-proof involves and Explosion-proof involves。

Gypsum ash pneumatic conveying

6、How much is the Gypsum ash pneumatic conveying?

The Gypsum ash pneumatic conveying price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. market factors

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Gypsum ash pneumatic conveying will be very high.

3. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. Company size

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

5. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Gypsum ash pneumatic conveying price and service can meet the actual needs of customers.

Gypsum ash pneumatic conveying

Gypsum ash pneumatic conveyingIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，the product looks beautiful.。