Introduction to Tungsten carbide pneumatic conveying and pneumatic conveying structure principle

Tungsten carbide pneumatic conveyingis a method of conveying materials through pipelines by using air flow with a certain speed.，the advantage is Materials are transported in a closed pipeline.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、High conveying speed, good conveying quality and high conveying efficiency.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、The operation mode is flexible and changeable, and it can run continuously or regularly.、Multi-point feeding and multi-point discharging are possible.，is developed and improved by hyde。The following is to introduce the Tungsten carbide pneumatic conveying:

1、Brief introduction of Tungsten carbide pneumatic conveying

Tungsten carbide pneumatic conveyingis a conveying system that uses airflow to convey powder and granular materials.，multifunctional, with functions such as material handling, Environmental protection and pollution-free, Closed conveying, Automatic control and Closed conveying。

Tungsten carbide pneumatic conveying

2、Structural advantages of Tungsten carbide pneumatic conveying

The Tungsten carbide pneumatic conveying has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Tungsten carbide pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Tungsten carbide pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Tungsten carbide pneumatic conveying

3、Introduction of Tungsten carbide pneumatic conveying characteristics

Tungsten carbide pneumatic conveyingThe conveying speed is faster,Convenient maintenance,omniseal,Reliable operation,Less maintenance.，It has the functions of Long distance transportation, Multi-point transportation, Dust removal and essence, Mixing and classification and Heating, cooling and drying，The price is more affordable。

Tungsten carbide pneumatic conveying

4、Tungsten carbide pneumatic conveying structure composition

The Tungsten carbide pneumatic conveying has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Tungsten carbide pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Tungsten carbide pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Tungsten carbide pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Tungsten carbide pneumatic conveying

5、Tungsten carbide pneumatic conveying work site real shot

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Tungsten carbide pneumatic conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Tungsten carbide pneumatic conveying price consultation

The Tungsten carbide pneumatic conveying price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

3. market

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Tungsten carbide pneumatic conveying market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

4. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. cost of production

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Tungsten carbide pneumatic conveying will also be reduced.

Tungsten carbide pneumatic conveying

Tungsten carbide pneumatic conveyingat work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，widely used in medicine, grain processing, machine building, metallurgy, building material and other fields，it is usually composed of Air source system, control system, dust pelletizing system, Conveying pipeline system and Air source system，This productThe structure is novel, special, advanced, reasonable and scientific.。