Introduction to PTA pneumatic conveying, Powder conveying specifications, model parameters

PTA pneumatic conveyingis a material conveying device that uses the pressure of gas to convey powder materials.，The structural design is more advanced and reasonable.，structure mainly includes: Conveying pipeline system, delivery system, Air source system, dust pelletizing system, dust pelletizing system and so on，is designed by hyde powder with advanced technology。

1、Brief introduction of PTA pneumatic conveying

PTA pneumatic conveyingis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，be loved by our customers.。

PTA pneumatic conveying

2、PTA pneumatic conveying function

PTA pneumatic conveyingit has the functions of Explosion-proof involves, Environmental protection and pollution-free, Environmental protection and pollution-free, material handling and Closed conveying，Materials are transported by closed pipelines.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.、The whole conveying process is sealed.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.，at work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，it has been widely used in plastic, power, chemical industry, cast, building material and other industries，is an advanced PTA pneumatic conveying developed by our company in combination with the actual situation of the industry。

PTA pneumatic conveying

3、PTA pneumatic conveying application

PTA pneumatic conveyings have the following purposes.

1. material handling

PTA pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Mixing and classification

In the process of conveying, the PTA pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Long-distance and multipoint transportation

The PTA pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes PTA pneumatic conveyings have important application value in large factories and cross-regional material transportation.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the PTA pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Reduce pollution

The PTA pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

PTA pneumatic conveying

4、Structural characteristics of PTA pneumatic conveying

The PTA pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the PTA pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Air source device

The air source device is the power core of the PTA pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of PTA pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

PTA pneumatic conveying

5、PTA pneumatic conveying video live broadcast

On-site aerial photography of PTA pneumatic conveying。

PTA pneumatic conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it is widely used in chemical plant, build a ship, building materials, environmental protection, medicine and other industries。

6、How much is the PTA pneumatic conveying?

The PTA pneumatic conveying price is introduced as follows:

1. product model

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

2. market

If there is a large demand for PTA pneumatic conveying in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde PTA pneumatic conveying manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the PTA pneumatic conveying price can meet the purchasing needs of customers.

5. Self quality

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of PTA pneumatic conveying is low.

PTA pneumatic conveying

PTA pneumatic conveyinggenerally, it is composed of delivery system, Bunker system, Conveying pipeline system, Air source system, control system and other major components，This productThe structure is novel, special, advanced, reasonable and scientific.，features include Stable operation, Reliable equipment, Large conveying capacity, Flexible layout and It is convenient to realize mechanization。