Introduction to Pneumatic conveying of beer lees and Powder conveying advantages and features

Pneumatic conveying of beer leesis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，Efficient and flexible,convenient to use,Flexible conveying distance,Large conveying capacity,Reliable equipment，It has the functions of cut down on energy consumption, Dust removal and essence, Long distance transportation, Environmental protection and cleaner production and material handling。

1、Brief introduction of Pneumatic conveying of beer lees

Pneumatic conveying of beer leesis a material conveying system that combines jet technology and fluidization technology.，the product looks atmospheric.。

Pneumatic conveying of beer lees

2、Advantages of Pneumatic conveying of beer lees principle

Pneumatic conveying of beer leesat the start of the operation,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，The structure is novel, special, advanced, reasonable and scientific.，it mainly includes Conveying pipeline system, dust pelletizing system, Bunker system, Air source system and control system。

Pneumatic conveying of beer lees

3、Pneumatic conveying of beer lees video live broadcast

You can buy Pneumatic conveying of beer lees according to your needs and show you product videos.。

Pneumatic conveying of beer lees

As you can see from the live video.，hyde powder the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

4、Structural characteristics of Pneumatic conveying of beer lees

The Pneumatic conveying of beer lees has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of beer lees system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying of beer lees

5、Pneumatic conveying of beer lees picture

The omni-directional high-definition real shot of the Pneumatic conveying of beer lees is shown as follows to meet the purchase needs of our customers.。

Pneumatic conveying of beer lees

Note: All the pictures in this article were taken by hyde manufacturer.。

Pneumatic conveying of beer leesfeatures include Can carry out long-distance dispersion transportation., Flexible layout, Operation safety, versatility and High conveying efficiency，the product looks beautiful.。