What is a Multi chamber pump pneumatic conveying? Introduction to the Working Principle of pneumatic conveying

Multi chamber pump pneumatic conveyingis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，is a kind of high quality and low price Multi chamber pump pneumatic conveying。

1、Brief introduction of Multi chamber pump pneumatic conveying

Multi chamber pump pneumatic conveyingis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，is a popular Multi chamber pump pneumatic conveying，the advantage is The whole conveying process is sealed.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、PLC intelligent control, high degree of automation and simple operation.、Fully enclosed transportation system, materials are transported in closed pipes.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.，It has a wide range of uses, including Reduce pollution, cut down on energy consumption, Multi-point transportation, Mixing and classification and Multi-point transportation，support customization。

Multi chamber pump pneumatic conveying

2、Introduction of Multi chamber pump pneumatic conveying characteristics

Multi chamber pump pneumatic conveyingfeatures include energy saving and environmental protection, Flexible layout, High production efficiency, Reliable equipment and It is convenient to realize mechanization，it is usually composed of control system, Conveying pipeline system, Bunker system, Bunker system and Conveying pipeline system，Multi chamber pump pneumatic conveyingThe overall structural design is relatively simple and compact.，it is an ideal choice for customers to buy Multi chamber pump pneumatic conveying。

Multi chamber pump pneumatic conveying

3、Multi chamber pump pneumatic conveying structure composition

The Multi chamber pump pneumatic conveying has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. control system

The control system is the "brain" of the Multi chamber pump pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Multi chamber pump pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Multi chamber pump pneumatic conveying

4、Multi chamber pump pneumatic conveying application

Multi chamber pump pneumatic conveyings have the following purposes.

1. material handling

Multi chamber pump pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Dust removal and purification

The Multi chamber pump pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. cut down on energy consumption

Although the power consumption of the Multi chamber pump pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Environmental protection and cleaner production

The Multi chamber pump pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. Process assistance

In some production processes, Multi chamber pump pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Multi chamber pump pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Multi chamber pump pneumatic conveying

5、Multi chamber pump pneumatic conveying performance advantage

Multi chamber pump pneumatic conveyings have the following advantages.

1. Wide application range

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Multi chamber pump pneumatic conveying.

2. Multi-point to multi-point transportation

The Multi chamber pump pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. Totally enclosed conveying

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Multi chamber pump pneumatic conveying system can be seamlessly connected with other production equipment to improve the overall production efficiency.

4. Multiple process operations can be carried out at the same time

While conveying materials, the Multi chamber pump pneumatic conveying system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

5. Low maintenance cost

The Multi chamber pump pneumatic conveying device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

Multi chamber pump pneumatic conveying

6、Multi chamber pump pneumatic conveying advantage

The advantages of Multi chamber pump pneumatic conveying are as follows:

1. High conveying efficiency and low cost.

Can transport materials quickly and in large quantities.

2. Multi-point to multi-point transportation

The Multi chamber pump pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. be of simple construction

Multi chamber pump pneumatic conveying has simple structure and convenient operation.

4. Wide application range

The Multi chamber pump pneumatic conveying system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

5. Strong sealing

The pipeline layout of the Multi chamber pump pneumatic conveying is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Multi chamber pump pneumatic conveying system to adapt to various complex production environments and meet different production needs.

Multi chamber pump pneumatic conveying

Multi chamber pump pneumatic conveyingin the course of work,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，is a Multi chamber pump pneumatic conveying。