What is a Powder and granular material transportation? Introduction to the principle of Material conveying structure

Powder and granular material transportationis a material conveying system that uses the pressure of gas to convey powder materials.，it is an ideal choice for customers to buy Powder and granular material transportation。The following is to introduce the Powder and granular material transportation:

1、Brief introduction of Powder and granular material transportation

Powder and granular material transportationIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，the principle is simple.Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，it is widely used intransportation,plastic,cast,environmental protection,medicine and other industries。

Powder and granular material transportation

2、Introduction of advantages of Powder and granular material transportation

Powder and granular material transportations have the following advantages.

1. Multi-point to multi-point transportation

The Powder and granular material transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Convenient maintenance and easy automation.

The Powder and granular material transportation device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

3. Strong sealing

The Powder and granular material transportation is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

4. High degree of automation

The Powder and granular material transportation system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

5. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

Powder and granular material transportation

3、Powder and granular material transportation structure composition

The Powder and granular material transportation has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Powder and granular material transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. control system

The control system is the "brain" of the Powder and granular material transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Powder and granular material transportation

4、Powder and granular material transportation video detail

You can buy Powder and granular material transportation according to your needs and show you product videos.。

Powder and granular material transportation

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a kind of high quality and low price Powder and granular material transportation。

5、Advantages of Powder and granular material transportation principle

Powder and granular material transportationthe principle is simple.Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，is a common Powder and granular material transportation，It is a product series that integrates Mixing and classification, cut down on energy consumption, Reduce pollution, Bulk material transportation and Multi-point transportation，the main structure includes Air source system, Air source system, control system, delivery system, dust pelletizing system and so on，features include energy saving and environmental protection, Can reduce the labor intensity, The conveying speed is faster, automation and Efficient and flexible。

Powder and granular material transportation

6、hyde powder service

Customers should not only consider quality, performance and price factors when purchasing Powder and granular material transportation, but also consider the after-sales service of manufacturers. Good after-sales service can reduce many unnecessary troubles for customers. hyde Factory always adheres to the service attitude of "customer is God", implements high-standard and high-quality after-sales service attitude, conducts regular customer satisfaction surveys, and strictly supervises the quality of after-sales service, so as to relieve customers' purchasing concerns and make purchasing customers completely worry-free.。

hyde powder

Powder and granular material transportationit is widely used in logistics, pharmaceutical factory, building material, build a ship and chemical plant，is a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，at work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.。