Introduction to Unpacking pneumatic conveying system and Material conveying structure principle

Unpacking pneumatic conveying systemIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，it has the characteristics of easy installation, Reliable operation, Reduce material loss, versatility and Large conveying capacity。

1、Brief introduction of Unpacking pneumatic conveying system

Unpacking pneumatic conveying systemmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dry.、Can be charged at one place and then discharged at multiple places.、In the conveying process, various technological operations can be carried out at the same time.、Fully enclosed transportation system, materials are transported in closed pipes.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.，it is usually composed of dust pelletizing system, dust pelletizing system, Bunker system, Air source system and Conveying pipeline system，This productThe overall structural design is simple and novel.。

Unpacking pneumatic conveying system

2、Unpacking pneumatic conveying system performance advantage

The advantages of Unpacking pneumatic conveying system are as follows:

1. versatility

While conveying materials, the Unpacking pneumatic conveying system system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Unpacking pneumatic conveying system more flexible and adaptable in the production process.

2. be simple in structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

3. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

4. Efficient continuous transportation

The Unpacking pneumatic conveying system can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

5. Totally enclosed conveying

The pipeline layout of the Unpacking pneumatic conveying system is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Unpacking pneumatic conveying system system to adapt to various complex production environments and meet different production needs.

Unpacking pneumatic conveying system

3、Unpacking pneumatic conveying system structure composition

The Unpacking pneumatic conveying system structure is introduced as follows:

1. control system

The control system is the "brain" of the Unpacking pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Unpacking pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Unpacking pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Unpacking pneumatic conveying system

4、Unpacking pneumatic conveying system principle

Unpacking pneumatic conveying systemat the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.。

Unpacking pneumatic conveying system

5、Introduction of Unpacking pneumatic conveying system characteristics

Unpacking pneumatic conveying systemIt is convenient to realize mechanization,Fast conveying speed,Easy maintenance,Low energy consumption,omniseal，can be customized according to user's needs.。

Unpacking pneumatic conveying system

6、hyde delivery site

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Unpacking pneumatic conveying systemt operation, and helps customers to deeply understand the Unpacking pneumatic conveying system production process and production site, and gain favorable comments and recognition from customers.。

Unpacking pneumatic conveying system

As you can see from the live video.hyde Flexible conveying distance,Avoid material pollution,The failure rate is low,energy saving and environmental protection,Quantitative transportation。

Unpacking pneumatic conveying systemat runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，is a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.。