What is a Unpacking pneumatic conveying equipment? Introduction to the advantages, characteristics, and principles of the Powder pneumatic conveying

Unpacking pneumatic conveying equipmentis a kind of material conveying equipment which combines jet technology and fluidization technology.，be loved by our customers.。The following is to introduce the Unpacking pneumatic conveying equipment:

1、Brief introduction of Unpacking pneumatic conveying equipment

Unpacking pneumatic conveying equipmentis an efficient and environment-friendly way to transport materials by using the energy of airflow.，is a common Unpacking pneumatic conveying equipment。

Unpacking pneumatic conveying equipment

2、Unpacking pneumatic conveying equipment picture

The panoramic shooting of hyde powder Unpacking pneumatic conveying equipment is shown as follows.。

Unpacking pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Unpacking pneumatic conveying equipment use

The purpose of Unpacking pneumatic conveying equipment is introduced as follows:

1. Long distance transportation

The Unpacking pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. save energy and cut emissions

Although the Unpacking pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Mixing and classification

In the process of conveying, the Unpacking pneumatic conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Unpacking pneumatic conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. cut down on energy consumption

Although the power consumption of the Unpacking pneumatic conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Unpacking pneumatic conveying equipment

4、Unpacking pneumatic conveying equipment structure

The Unpacking pneumatic conveying equipment structure is introduced as follows:

1. Air source device

The air source device is the power core of the Unpacking pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Unpacking pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Unpacking pneumatic conveying equipment

5、Unpacking pneumatic conveying equipment explanation video

You can buy Unpacking pneumatic conveying equipment according to your needs and show you Unpacking pneumatic conveying equipment videos.。

Unpacking pneumatic conveying equipment

As you can see from the live video.，hyde powder it mainly includes control system, delivery system, control system, delivery system and dust pelletizing system。

6、Unpacking pneumatic conveying equipment characteristics

Unpacking pneumatic conveying equipmentit has the characteristics of No secondary pollution, Flexible transmission line, High conveying efficiency, High degree of automation and Good dustproof effect，Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，it is an ideal choice for customers to buy Unpacking pneumatic conveying equipment。

Unpacking pneumatic conveying equipment

Unpacking pneumatic conveying equipmentmultifunctional, with functions such as material handling, Environmental protection and pollution-free, Physical processing assistance, Explosion-proof involves and Environmental protection and pollution-free，is a popular Unpacking pneumatic conveying equipment，it is widely used in pharmaceutical factory, logistics, heat-engine plant, plastic, grain processing and other industries。