Introduction to Particle sand pneumatic conveying system, how much is the price of the Powder pneumatic conveying?

Particle sand pneumatic conveying systemIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，it is widely used inlogistics,building material,environmental protection,medicine,power and other industries。The following is to introduce the Particle sand pneumatic conveying system:

1、Brief introduction of Particle sand pneumatic conveying system

Particle sand pneumatic conveying systemis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.。

Particle sand pneumatic conveying system

2、Particle sand pneumatic conveying system characteristics

Particle sand pneumatic conveying systemStable operation,High system reliability,Fast conveying speed,be of simple construction,versatility，in the course of work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，It is a product series that integrates Long distance transportation, Mixing and classification, Reduce pollution, Environmental protection and cleaner production and Bulk material transportation。

Particle sand pneumatic conveying system

3、Particle sand pneumatic conveying system use

The purpose of Particle sand pneumatic conveying system is introduced as follows:

1. material handling

Particle sand pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Particle sand pneumatic conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

3. Reduce pollution

The Particle sand pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. save energy and cut emissions

Although the Particle sand pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Environmental protection and cleaner production

The Particle sand pneumatic conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Particle sand pneumatic conveying system

4、Particle sand pneumatic conveying system structure

The Particle sand pneumatic conveying system structure is introduced as follows:

1. Air source device

The air source device is the power core of the Particle sand pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. control system

The control system is the "brain" of the Particle sand pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Particle sand pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Particle sand pneumatic conveying system

5、Introduction of advantages of Particle sand pneumatic conveying system

The advantages of Particle sand pneumatic conveying system are as follows:

1. Low maintenance cost

Although the initial investment of Particle sand pneumatic conveying system system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

2. The quality of convey materials is ensure.

In the process of conveying, the Particle sand pneumatic conveying system can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

3. Strong adaptability

The Particle sand pneumatic conveying system system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Particle sand pneumatic conveying systems widely used in many industries.

4. be simple in structure

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

5. Save space

Compared with the traditional mechanical conveying mode, the Particle sand pneumatic conveying system system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

Particle sand pneumatic conveying system

Particle sand pneumatic conveying systemis a kind of high quality and low price Particle sand pneumatic conveying system，Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、The materials are completely sealed during transportation.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation，at the start of the operation,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。