Introduction to Zircon sand pneumatic conveying system, Pneumatic conveying equipment advantages, characteristics and principles

Zircon sand pneumatic conveying systemis a technology to transport solid particulate materials through air flow.，Mainly used forReduce pollution,cut down on energy consumption,material handling,Long distance transportation andProcess assistance，is a common Zircon sand pneumatic conveying system，was developed and designed by hyde powder。

1、Brief introduction of Zircon sand pneumatic conveying system

Zircon sand pneumatic conveying systemis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，the advantage is The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Multi-point feeding and multi-point discharging are possible.、Closed pipeline transportation，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、Fully enclosed transportation system, materials are transported in closed pipes.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Can be transported from one point to one place or from one point to many points.，has been favored by more and more customers.。

Zircon sand pneumatic conveying system

2、Zircon sand pneumatic conveying system structure

The Zircon sand pneumatic conveying system structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. control system

The control system is the "brain" of the Zircon sand pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Zircon sand pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Zircon sand pneumatic conveying system

3、Zircon sand pneumatic conveying system use

The purpose of Zircon sand pneumatic conveying system is introduced as follows:

1. Multi-point transportation

The Zircon sand pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Dust removal and purification

The Zircon sand pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. Reduce pollution

The Zircon sand pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Long-distance and multipoint transportation

The Zircon sand pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Zircon sand pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

5. material handling

Zircon sand pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Zircon sand pneumatic conveying system

4、Introduction of Zircon sand pneumatic conveying system characteristics

Zircon sand pneumatic conveying systemThe failure rate is low,Stable operation,Centralized transportation,Long conveying distance,Various processes，is a kind of high quality and low price Zircon sand pneumatic conveying system，Commonly used inBulk material transportation,Multi-point transportation,Mixing and classification,Environmental protection and cleaner production,Heating, cooling and drying and so on，at the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，the product looks beautiful.。

Zircon sand pneumatic conveying system

5、Zircon sand pneumatic conveying system work site real shot

Zircon sand pneumatic conveying system specifications and models are complete, and customers can choose at will. High-definition pictures are available for customers' reference. Customers are welcome to visit our factory.。

Zircon sand pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Zircon sand pneumatic conveying system price consultation

The Zircon sand pneumatic conveying system price is introduced as follows:

1. Self quality

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Zircon sand pneumatic conveying system, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

2. Manufacturer scale

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

3. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. type of operation

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Zircon sand pneumatic conveying system is low.

5. specifications and models

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

Zircon sand pneumatic conveying system

Zircon sand pneumatic conveying systemthe product looks atmospheric.，is a conveying system that uses airflow to convey powder and granular materials.。