What is a Pneumatic conveying equipment for battery materials? Powder conveying specifications, models, and parameters

Pneumatic conveying equipment for battery materialsby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.，The overall structural design is simple, diverse and beautiful.，it is mainly composed of Bunker system, dust pelletizing system, control system, Air source system and Bunker system，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as smash.、High conveying speed, good conveying quality and high conveying efficiency.、The materials are completely sealed during transportation.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.，it is an ideal choice for customers to buy Pneumatic conveying equipment for battery materials。

1、Brief introduction of Pneumatic conveying equipment for battery materials

Pneumatic conveying equipment for battery materialsalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.。

Pneumatic conveying equipment for battery materials

2、Pneumatic conveying equipment for battery materials application

Pneumatic conveying equipment for battery materialss have the following purposes.

1. Long-distance and multipoint transportation

The Pneumatic conveying equipment for battery materials system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Pneumatic conveying equipment for battery materialss have important application value in large factories and cross-regional material transportation.

2. Long distance transportation

The Pneumatic conveying equipment for battery materials system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Adapt to complex environment

The Pneumatic conveying equipment for battery materials system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pneumatic conveying equipment for battery materials pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

4. Bulk material transportation

The Pneumatic conveying equipment for battery materials is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Pneumatic conveying equipment for battery materials, these materials can be efficiently transferred between different production links or equipment.

5. cut down on energy consumption

Although the power consumption of the Pneumatic conveying equipment for battery materials is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Pneumatic conveying equipment for battery materials

3、Pneumatic conveying equipment for battery materials structure composition

The Pneumatic conveying equipment for battery materials structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Pneumatic conveying equipment for battery materials system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Pneumatic conveying equipment for battery materials system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying equipment for battery materials

4、Pneumatic conveying equipment for battery materials customer scene picture

High-definition picture display of Pneumatic conveying equipment for battery materials, excellent material selection, reliable quality and trustworthy.。

Pneumatic conveying equipment for battery materials

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Pneumatic conveying equipment for battery materials video live broadcast

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Pneumatic conveying equipment for battery materialst operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Pneumatic conveying equipment for battery materials

As you can see from the live video.，hyde is a comprehensive technology, which involves fluid mechanics, material science, automation technology, manufacturing technology and other fields.。

6、Pneumatic conveying equipment for battery materials price advantage

The Pneumatic conveying equipment for battery materials price is introduced as follows:

1. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

2. Less intermediate links

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

3. Configuration difference

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. hyde powder has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

4. regional difference

The price of Pneumatic conveying equipment for battery materials in shandong(Province) is much lower than that in other regions, and hyde is a large factory not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Pneumatic conveying equipment for battery materials price positioning more reasonable, low-cost and economical.

5. raw material

The quality of material selection is one of the main factors that directly affect the Pneumatic conveying equipment for battery materials. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

Pneumatic conveying equipment for battery materials

Pneumatic conveying equipment for battery materialsit is widely used in metallurgy, machine building, transportation, plastic and logistics，in the course of work,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。