Introduction to Three leaf Roots blower made of cast steel and Roots Blower structure principle

Three leaf Roots blower made of cast steelis a double impeller synchronous compression machine, belonging to a positive displacement blower.，usually used in building materials, aquaculture, sewage disposal, pneumatic transport, smelt and other fields，it has the functions of material fluidization, desulfurization oxidation, cool, aquaculture and pick up the suction，the product looks atmospheric.，is a common Three leaf Roots blower made of cast steel。

1、Brief introduction of Three leaf Roots blower made of cast steel

Three leaf Roots blower made of cast steelis a positive displacement blower.，be of high quality。

Three leaf Roots blower made of cast steel

2、Three leaf Roots blower made of cast steel performance advantage

The advantages of Three leaf Roots blower made of cast steel are as follows:

1. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

2. Long service life

The mechanical friction of the Three leaf Roots blower made of cast steel is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

3. Stable air output

In the process of air intake and exhaust, the Three leaf Roots blower made of cast steel will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.

4. Durable performance

The impeller and shaft of the Three leaf Roots blower made of cast steel are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

5. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

Three leaf Roots blower made of cast steel

3、Functional advantages of Three leaf Roots blower made of cast steel

Three leaf Roots blower made of cast steels have the following advantages.

1. Low noise and vibration

The three-leaf rotor structure of the Three leaf Roots blower made of cast steel makes it less vibration and noise. This feature makes the Three leaf Roots blower made of cast steel work normally in situations where a quiet environment is needed.

2. Convenient maintenance

The structure of the Three leaf Roots blower made of cast steel is relatively simple and easy to maintain.

3. be of simple construction

The Three leaf Roots blower made of cast steel is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

4. Strong adaptability

Three leaf Roots blower made of cast steels are suitable for many purposes and have been widely used in various fields.

5. Long service life

The mechanical friction of the Three leaf Roots blower made of cast steel is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Three leaf Roots blower made of cast steel

4、Working principle of Three leaf Roots blower made of cast steel

Three leaf Roots blower made of cast steelat work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，is based on hyde is a Three leaf Roots blower made of cast steel newly developed by hyde powder。

Three leaf Roots blower made of cast steel

5、Introduction of Three leaf Roots blower made of cast steel characteristics

Three leaf Roots blower made of cast steelfeatures include strong adaptability, run smoothly, wide application range, low noise and convenient manufacture，It is mostly used in dry, Pressurized transportation, sewage disposal, Material fluidization, supply air, mix and so on，support customization。

Three leaf Roots blower made of cast steel

6、Working principle of Three leaf Roots blower made of cast steel

Three leaf Roots blower made of cast steelat work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，It can be used for Ventilation, Desulfurization oxidation, dehydrate, pick up the suction, cool, exhaust emission and so on，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower made of cast steel perform well in many situations where stable airflow is needed.、Because of the design of three-blade rotor, the Three leaf Roots blower made of cast steel has little vibration and low noise during operation, and the operation is stable and reliable、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower made of cast steel runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower made of cast steel less vibration and noise.，Widely used in mix, material handling, supply air, aeration and Desulfurization oxidation，is an advanced Three leaf Roots blower made of cast steel developed by our company in combination with the actual situation of the industry。

Three leaf Roots blower made of cast steel

Three leaf Roots blower made of cast steelit has the characteristics of be of simple construction, strong adaptability, durable performance, economical and durable and stable and reliable，is a positive displacement blower with forced gas transmission characteristics.。