Introduction to CO2 pressurized three bladed Roots blower and Roots Blower advantages and features

CO2 pressurized three bladed Roots bloweris a positive displacement blower with forced gas transmission characteristics.，it is widely used in Environmental protection industry, aquaculture, pottery and porcelain, smelt and Dust removal。The following is to introduce the CO2 pressurized three bladed Roots blower:

1、Brief introduction of CO2 pressurized three bladed Roots blower

CO2 pressurized three bladed Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，it has the functions of aeration, mix, dehydrate, sewage disposal and supply air，it mainly includes fuel tank, impeller, bearing, muffler and wallboard。

CO2 pressurized three bladed Roots blower

2、CO2 pressurized three bladed Roots blower use

CO2 pressurized three bladed Roots blowerIt has the functions of supply air, aquaculture, dehydrate, sewage disposal and Material fluidization，widely used insewage disposal,building materials,petrochemical industry,Flue gas treatment,petrify and other industries，the models are complete and can meet the needs of different users for different purposes.。

CO2 pressurized three bladed Roots blower

3、CO2 pressurized three bladed Roots blower work site real shot

hyde powder CO2 pressurized three bladed Roots blowerthe product looks beautiful., the picture is taken.。

CO2 pressurized three bladed Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

4、CO2 pressurized three bladed Roots blower principle

CO2 pressurized three bladed Roots blowerGas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，It can be used for dry, Desulfurization oxidation, material handling, exhaust emission, material handling, Ventilation and so on。

CO2 pressurized three bladed Roots blower

5、How much is the CO2 pressurized three bladed Roots blower?

The CO2 pressurized three bladed Roots blower price is introduced as follows:

1. manufacturing cost

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of CO2 pressurized three bladed Roots blower will also fluctuate to some extent.

2. Brand strength

At present, there are various brands of CO2 pressurized three bladed Roots blower in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of CO2 pressurized three bladed Roots blower are different.

3. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. Configuration level

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the CO2 pressurized three bladed Roots blower, which is beyond doubt. hyde makes every product with great care in the attitude of being highly responsible to customers, so the price of hyde powder CO2 pressurized three bladed Roots blower is reasonable for products with the same configuration.

5. marketing channel

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

CO2 pressurized three bladed Roots blower

6、hyde powder workshop real shot

The following is the live video of CO2 pressurized three bladed Roots blower designed and produced by hyde for users, from which we can see the Because of the design of three-blade rotor, the CO2 pressurized three bladed Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the CO2 pressurized three bladed Roots blower less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the CO2 pressurized three bladed Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the CO2 pressurized three bladed Roots blower perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation. of hydeCO2 pressurized three bladed Roots blower.。

CO2 pressurized three bladed Roots blower

As you can see from the live video.hyde powder multifunctional, with functions such as material fluidization, desulfurization oxidation, material handling, exhaust emission and aquaculture。

CO2 pressurized three bladed Roots blowerat runtime,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，In the process of air intake and exhaust, the CO2 pressurized three bladed Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the CO2 pressurized three bladed Roots blower has little vibration and low noise during operation, and the operation is stable and reliable，It has a wide range of uses, including Pressurized transportation, cool, exhaust emission, Ventilation and pick up the suction。