Introduction to CO2 pressurized three blade Roots blower, introduction to blower advantages and characteristics

CO2 pressurized three blade Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，convenient manufacture,wide application range,run smoothly,Precise control,economical and durable，It has a wide range of uses, and is often used inaeration,pick up the suction,supply air,dry,Material fluidization and so on，is carefully developed by hyde powder combined with advanced technology。The following is to introduce the CO2 pressurized three blade Roots blower:

1、Brief introduction of CO2 pressurized three blade Roots blower

CO2 pressurized three blade Roots bloweris a positive displacement blower.，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、In the process of air intake and exhaust, the CO2 pressurized three blade Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，is a popular CO2 pressurized three blade Roots blower，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，the product looks beautiful.。

CO2 pressurized three blade Roots blower

2、CO2 pressurized three blade Roots blower characteristics

CO2 pressurized three blade Roots blowerfeatures include be of simple construction, convenient maintenance, durable performance, wide application range and run smoothly，Commonly used inDesulfurization oxidation,Pressurized transportation,sewage disposal,aquaculture,mix and so on，has been favored by more and more customers.。

CO2 pressurized three blade Roots blower

3、Advantages of CO2 pressurized three blade Roots blower principle

CO2 pressurized three blade Roots blowerat work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，the main features are strong adaptability, Precise control, energy-efficient, convenient maintenance and run smoothly，Cheap and high quality。

CO2 pressurized three blade Roots blower

4、CO2 pressurized three blade Roots blower structure composition

The CO2 pressurized three blade Roots blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. impeller

It is the rotating part of the CO2 pressurized three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf CO2 pressurized three blade Roots blower has gradually replaced the two-leaf CO2 pressurized three blade Roots blower.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. muffler

Used to reduce the noise caused by airflow pulsation when the CO2 pressurized three blade Roots blower enters and exits.

CO2 pressurized three blade Roots blower

5、CO2 pressurized three blade Roots blower function

CO2 pressurized three blade Roots blowerit has the functions of cool, pressurized transportation, pick up the suction, ventilation and dry。

CO2 pressurized three blade Roots blower

6、How much is the CO2 pressurized three blade Roots blower?

The CO2 pressurized three blade Roots blower price is introduced as follows:

1. market factors

The CO2 pressurized three blade Roots blower market is always a fluctuating variable value. When the demand for this product in the market is far greater than the supply, the product price will be higher. On the other hand, when the market demand is much less than the supply, manufacturers are eager to sell their products and lower their prices appropriately.

2. region

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

3. quality factor

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde CO2 pressurized three blade Roots blower manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the CO2 pressurized three blade Roots blower price can meet the purchasing needs of customers.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

CO2 pressurized three blade Roots blower

CO2 pressurized three blade Roots blowerit has the characteristics of convenient manufacture, stable and reliable, low noise, smooth operation and wide application range，is a positive displacement blower.，it can be used in pneumatic transport, mine, make paper, port, mine and other industries。