What is a Aquaculture aerator Roots blower? Introduction to the principle of Roots Blower structure

Aquaculture aerator Roots blowerthe models are complete and can meet the needs of different users for different purposes.。The following is to introduce the Aquaculture aerator Roots blower:

1、Brief introduction of Aquaculture aerator Roots blower

Aquaculture aerator Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，at runtime,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，Widely used inVentilation,cool,Desulfurization oxidation,supply air,dry and so on，It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Aquaculture aerator Roots blower perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Aquaculture aerator Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、In the process of air intake and exhaust, the Aquaculture aerator Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，it is an ideal choice for customers to buy Aquaculture aerator Roots blower。

Aquaculture aerator Roots blower

2、Aquaculture aerator Roots blower function

Aquaculture aerator Roots blowerit has the functions of material fluidization, cool, dry, material handling and exhaust emission，support customization。

Aquaculture aerator Roots blower

3、Introduction of Aquaculture aerator Roots blower characteristics

Aquaculture aerator Roots blowerfeatures include energy-efficient, stable and reliable, energy-efficient, be of simple construction and wide application range，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、In the process of air intake and exhaust, the Aquaculture aerator Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Because of the design of three-blade rotor, the Aquaculture aerator Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，It has a wide range of uses, including pick up the suction, mix, sewage disposal, cool and Desulfurization oxidation，it has the functions of pick up the suction, ventilation, pressurized transportation, dehydrate and desulfurization oxidation，low in price。

Aquaculture aerator Roots blower

4、Aquaculture aerator Roots blower structure composition

The Aquaculture aerator Roots blower structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Aquaculture aerator Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Aquaculture aerator Roots blower enters and exits.

5. impeller

It is the rotating part of the Aquaculture aerator Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Aquaculture aerator Roots blower has gradually replaced the two-leaf Aquaculture aerator Roots blower.

Aquaculture aerator Roots blower

5、Functional advantages of Aquaculture aerator Roots blower

Aquaculture aerator Roots blowers have the following advantages.

1. Low noise and vibration

The three-leaf rotor structure of the Aquaculture aerator Roots blower makes it less vibration and noise. This feature makes the Aquaculture aerator Roots blower work normally in situations where a quiet environment is needed.

2. Stable air output

The air volume of the Aquaculture aerator Roots blower is proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Aquaculture aerator Roots blower perform well in many situations where stable airflow is needed.

3. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

4. be of simple construction

The Aquaculture aerator Roots blower is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

5. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

Aquaculture aerator Roots blower

6、hyde's strength

The company has many years of Aquaculture aerator Roots blower manufacturing experience, large scale and strong strength.。

hyde powder

Aquaculture aerator Roots blowerThe overall structural design is simple and novel.，structure mainly includes: case, impeller, fuel tank, bearing, wallboard and so on，multifunctional, with functions such as exhaust emission, aquaculture, sewage disposal, supply air and material handling，Commonly used inPressurized transportation,aquaculture,aeration,pick up the suction,Material fluidization and so on。