Introduction to Three leaf Roots blower for material conveying, Roots Blower specifications, model parameters

Three leaf Roots blower for material conveyingis a double impeller synchronous compression machine, belonging to a positive displacement blower.，structure mainly includes: muffler, rotator, bearing, case, impeller and so on，it is widely used in power, pottery and porcelain, power, make paper, sewage disposal and other industries，is a Three leaf Roots blower for material conveying，is carefully developed by hyde powder combined with advanced technology。

1、Brief introduction of Three leaf Roots blower for material conveying

Three leaf Roots blower for material conveyingis a positive displacement blower.，the principle is simple.Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。

Three leaf Roots blower for material conveying

2、Functional advantages of Three leaf Roots blower for material conveying

Three leaf Roots blower for material conveyings have the following advantages.

1. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

2. Long service life

The mechanical friction of the Three leaf Roots blower for material conveying is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

3. Run smoothly

The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for material conveying less vibration and noise.

4. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

5. Strong adaptability

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

Three leaf Roots blower for material conveying

3、Introduction of Three leaf Roots blower for material conveying characteristics

Three leaf Roots blower for material conveyingstrong adaptability,durable performance,Precise control,wide application range,durable performance，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、In the process of air intake and exhaust, the Three leaf Roots blower for material conveying will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Because of the design of three-blade rotor, the Three leaf Roots blower for material conveying has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for material conveying less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for material conveying runs stably and reliably, without contact and wear parts, and has a long service life.。

Three leaf Roots blower for material conveying

4、Three leaf Roots blower for material conveying structure composition

The Three leaf Roots blower for material conveying has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. impeller

It is the rotating part of the Three leaf Roots blower for material conveying, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots blower for material conveying has gradually replaced the two-leaf Three leaf Roots blower for material conveying.

Three leaf Roots blower for material conveying

5、Three leaf Roots blower for material conveying HD real picture

Three leaf Roots blower for material conveying complete specifications and models, the product looks beautiful.。

Three leaf Roots blower for material conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Company service

Perfect after-sales service is hyde's business policy. Our company has a professional after-sales service team, and all customer service personnel and maintenance technicians need pre-job training before they can take up their posts. Before the sale, there are customer service personnel to cooperate with customers to do a good job in product selection, and at the same time provide detailed information such as Three leaf Roots blower for material conveying price and technical parameters; During the sale, sign a formal purchase contract with the customer and do a good job in product inspection to prevent leakage and delay the start-up time of the customer; After sale, we will provide customers with free transportation, installation and post-maintenance work. At the same time, we will pay regular return visits to the use of products. Once problems are found, we will send technicians to deal with them in time, and always keep the interests of customers doubled.。

hyde powder

Three leaf Roots blower for material conveyingthe product looks atmospheric.，it can be used in Flue gas treatment, mine, Food and beverage processing, manufacturing industry, make paper and other industries。