Introduction to Three leaf Roots blower for powder pneumatic conveying, blower specifications, model parameters

Three leaf Roots blower for powder pneumatic conveyinga rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，Commonly used inPressurized transportation,cool,material handling,aeration,aquaculture and so on，the product looks atmospheric.，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，is a Three leaf Roots blower for powder pneumatic conveying newly developed by hyde powder。The following is to introduce the Three leaf Roots blower for powder pneumatic conveying:

1、Brief introduction of Three leaf Roots blower for powder pneumatic conveying

Three leaf Roots blower for powder pneumatic conveyingis an efficient volumetric gas conveying and pressurizing equipment.，it is mainly composed of fuel tank, case, impeller, wallboard and bearing，is a Three leaf Roots blower for powder pneumatic conveying，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for powder pneumatic conveying less vibration and noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for powder pneumatic conveying perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for powder pneumatic conveying runs stably and reliably, without contact and wear parts, and has a long service life.，is designed by hyde with advanced technology。

Three leaf Roots blower for powder pneumatic conveying

2、Three leaf Roots blower for powder pneumatic conveying function

Three leaf Roots blower for powder pneumatic conveyingit has the functions of exhaust emission, ventilation, material fluidization, supply air and pick up the suction，it is an ideal choice for customers to buy Three leaf Roots blower for powder pneumatic conveying。

Three leaf Roots blower for powder pneumatic conveying

3、Three leaf Roots blower for powder pneumatic conveying structure

The Three leaf Roots blower for powder pneumatic conveying structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Three leaf Roots blower for powder pneumatic conveying, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots blower for powder pneumatic conveying enters and exits.

Three leaf Roots blower for powder pneumatic conveying

4、Three leaf Roots blower for powder pneumatic conveying principle

Three leaf Roots blower for powder pneumatic conveyingIt mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，support customization。

Three leaf Roots blower for powder pneumatic conveying

5、Three leaf Roots blower for powder pneumatic conveying price concessions

The Three leaf Roots blower for powder pneumatic conveying price is introduced as follows:

1. cost of production

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Three leaf Roots blower for powder pneumatic conveying.

2. mass discrepancy

Quality is an important and fundamental factor that affects the price of Three leaf Roots blower for powder pneumatic conveying. In the final analysis, its price depends on its quality. Usually, Three leaf Roots blower for powder pneumatic conveying with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Three leaf Roots blower for powder pneumatic conveying with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

3. regional difference

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. hyde powder the site is located at:jinan, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. Parameter size

Different customers need different output, different specifications, different product configurations, and their Three leaf Roots blower for powder pneumatic conveying prices are also different. The bigger the specification, the stronger the performance of the product and the higher the quotation.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Three leaf Roots blower for powder pneumatic conveying manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Three leaf Roots blower for powder pneumatic conveying price can meet the purchasing needs of customers.

Three leaf Roots blower for powder pneumatic conveying

6、hyde powder company service

On the premise of ensuring high quality and low price, hyde can also provide customers with high-standard services, help customers choose appropriate specifications and models, and install and debug products on site for them free of charge. If customers have special requirements, our company can also train product operators in operation knowledge. Besides, if everyone's products fail at any time, our company will rush to the scene to solve them in a short time and deal with them in time.。

hyde powder

Three leaf Roots blower for powder pneumatic conveyingthe main features are be of simple construction, low noise, smooth operation, wide application range and run smoothly，is a positive displacement blower with forced gas transmission characteristics.，multifunctional, with functions such as dehydrate, material handling, mix, dry and aeration。