What is a Three leaf Roots vacuum pump for pneumatic conveying? How much is the price of the Roots Blower?

Three leaf Roots vacuum pump for pneumatic conveyingis a positive displacement blower.，is carefully developed by hyde powder combined with advanced technology。The following is to introduce the Three leaf Roots vacuum pump for pneumatic conveying:

1、Brief introduction of Three leaf Roots vacuum pump for pneumatic conveying

Three leaf Roots vacuum pump for pneumatic conveyingis a positive displacement blower with forced gas transmission characteristics.。

Three leaf Roots vacuum pump for pneumatic conveying

2、Three leaf Roots vacuum pump for pneumatic conveying introduction video

On-site aerial photography of Three leaf Roots vacuum pump for pneumatic conveying。

Three leaf Roots vacuum pump for pneumatic conveying

As you can see from the live video.，hyde is a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.。

3、Three leaf Roots vacuum pump for pneumatic conveying function

Three leaf Roots vacuum pump for pneumatic conveyingmultifunctional, with functions such as mix, material fluidization, cool, pressurized transportation and exhaust emission。

Three leaf Roots vacuum pump for pneumatic conveying

4、Structural advantages of Three leaf Roots vacuum pump for pneumatic conveying

The Three leaf Roots vacuum pump for pneumatic conveying has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots vacuum pump for pneumatic conveying enters and exits.

4. impeller

It is the rotating part of the Three leaf Roots vacuum pump for pneumatic conveying, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots vacuum pump for pneumatic conveying has gradually replaced the two-leaf Three leaf Roots vacuum pump for pneumatic conveying.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Three leaf Roots vacuum pump for pneumatic conveying, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Three leaf Roots vacuum pump for pneumatic conveying

5、Advantages of Three leaf Roots vacuum pump for pneumatic conveying principle

Three leaf Roots vacuum pump for pneumatic conveyingat the start of the operation,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，is a kind of high quality and low price Three leaf Roots vacuum pump for pneumatic conveying，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots vacuum pump for pneumatic conveying perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots vacuum pump for pneumatic conveying runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，it has the functions of desulfurization oxidation, aeration, sewage disposal, dry and aquaculture，is a Three leaf Roots vacuum pump for pneumatic conveying。

Three leaf Roots vacuum pump for pneumatic conveying

6、Three leaf Roots vacuum pump for pneumatic conveying application

Three leaf Roots vacuum pump for pneumatic conveyingIt can be used for Pressurized transportation, mix, sewage disposal, exhaust emission, Material fluidization, pick up the suction and so on，is a popular Three leaf Roots vacuum pump for pneumatic conveying，the main features are low noise, be of simple construction, convenient maintenance, be of simple construction and wide application range，at work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，has been favored by more and more customers.。

Three leaf Roots vacuum pump for pneumatic conveying

Three leaf Roots vacuum pump for pneumatic conveyingis a common Three leaf Roots vacuum pump for pneumatic conveying，it has the functions of material handling, dehydrate, ventilation, pick up the suction and supply air，the advantage is It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots vacuum pump for pneumatic conveying runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots vacuum pump for pneumatic conveying less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。